GOODWILL CAVITY WIRE TIES

$0.00

Cavity Ties Made from 470gm galvanised wire or 316 marine grade stainless to conform to AS 3700 – 2018.

All wire used is either 3.00mm, 3.15 mm or 4.00 mm diameter and these sizes have been used when tested to meet the requirements of AS 3700-2011.

A cavity tie is designed to tie together two leaves of masonry that are separated by a clear cavity of any width.

Length of ties is determined by adding Cavity Width + plus a minimum embedment of 50mm in each leaf as detailed in AS3700-2011.

Note: At least 50mm must be embedded into the mortar over each brick.

Wire Diameter Overall Length 3.00 mm x 170 mm 3.15 mm x 200 mm 3.15 mm x 250 mm 3.15 mm x 300 mm 4.00 mm x 180 mm 4.00 mm x 200 mm 4.00 mm x 230 mm 4.00 mm x 250 mm 4.00 mm x 300 mm 4.00 mm x 360 mm 6.30 mm x 180 mm 6.30 mm x 200 mm 6.30 mm x 230 mm 6.30 mm x 250 mm 6.30 mm x 280 mm 6.30 mm x 300 mm 6.30 mm x 350 mm 6.30 mm x 400 mm

Quantity